Tools

  • Table Saw: 8.25” diameter blade, DeWalt DWE7485
  • Miter Saw: 10” diameter compound miter saw, Hitachi C10FCE2
  • Circular Saw: 7.25” diameter blade, 12 Amp, Craftsman 172.10855
  • Scroll Saw: 3” reciprocating blade, DeWalt DW788
  • Drill Press: 12″ drill press, 12 speeds, Ryobi DP120
  • Jointer: 8″ wide benchtop planer Porter-Cable PC160JT
  • Planer: 13″ wide, three-blade thickness planer, DeWalt DW735X
  • Bench Grinder: 6″ thin line bench grinder, Ryobi BGH615
  • Belt Sander: 4” wide belt, Craftsman 113.226423
  • Disk Sander: 6” diameter disk, Craftsman 113.226423
  • Handheld Sanders: Random orbit sander, DeWalt DWE6421, 1/3rd sheet finishing sander, Black & Decker FS350
  • Jigsaw: 6 Amp orbital jigsaw, Porter Cable PC6005S
  • Wood Lathe: 700-3200 RPM, 13” max length, 8” max diameter, WL1704
  • Nailgun: electric staple & nail gun, Stanley TRE550Z
  • Spray Booth: 3ft x 3ft spray area connected to ventilation
  • Hand Tools: tool chest of hand saws, pliers, screwdrivers, hammers, wrenches, measurement, etc.
  • Hardware: screws, nails, nuts, bolts, washers
  • Soldering Stations: Variable temp soldering irons, Aoyue Int 936, Weller WTCPT
  • Hot Air Rework Station: SMD rework station, Circuit Specialists CSI 825A++, Sunkko 850A
  • Fume Extractor: fume extracting fan, SolderWerks BlackJack BK486
  • DC Power Supply: 0-50V/0-2A, 100W, Digital, Hewlett-Packard 6633A
  • Oscilloscope: 2 channel, JDR Instruments 2000
  • Multimeters: several handheld multimeters, Ohms, AC/DC Volts
  • Spectrum Analyzer: Analog spectrum analyzer, Hewlett-Packard 8555A
  • Component Supplies: resistors, capacitors, wire, fuses, connectors, relays, buttons, integrated circuits, googly eyes
  • Laser Cutter: 20” x 12” cutting area, 45WCO2 laser, Full Spectrum Laser H-Series

  • Projector: Full HD projector, Panasonic PT-AR100
  • Wooden Stereos: Plywood speakers with 4 transducer each, 12” subwoofer
  • Laser Printer: black & white laser printer, Brother MFC 7820N
  • Filament 3D Printer: 223 x 223 x 305mm print volume with 60 micron min layer resolution, Ultimaker 2+ Extended
  • Resin 3D Printer: 118 x 65 x 110mm print volume with 35 micron min layer resolution, Monoprice MP Mini SLA
  • CNC Embroidery Machine: Vintage Singer with CNC gantry
  • Sewing Machine: Kenmore sewing machine
  • Serger: Singer Tiny Serger
  • Vinyl Cutter: 4ft wide vinyl cutter, SummaCut D120SE
  • CNC Mill: 30x18x4.5cm working area, 3018 Pro

  • Fridge
  • Microwave
  • Water Cooler

  • Dedicated member spaces for Core members

 

Training is required prior to operating power tools and some hand tools. Always wear proper safety gear – we have goggles, earplugs, dust masks available. Please be courteous – warn other members in the room if you are about to operate a loud tool.