Hive76 / Fri, 02 Jul 2021 17:10:47 +0000 en-US hourly 1 https://wordpress.org/?v=4.9.8 /wp-content/uploads/2021/01/hive76-favicon-100x100.png Hive76 / 32 32 Reopening and Relaxing of COVID Restrictions /2021/06/reopening-and-relaxing-of-covid-restrictions/ Sat, 12 Jun 2021 22:47:36 +0000 https://ui-2ede8f0317111fa31aab6b6e6163754b.sandstorm.hive76.org/?p=7192 Continue reading "Reopening and Relaxing of COVID Restrictions"

]]>
Thanks to all members and guests who followed our COVID rules. As vaccinations increase, we’re relaxing our restrictions.

Got your shot? Masks can come off!

If you’ve received your COVID-19 vaccine(s) and reached the point of full immunity, masks are optional.

If you’re not vaxxed, keep wearing a mask

If you haven’t recieved a COVID-19 vaccine and reached full immunity, masks are still required to protect other members

No more occupancy limits

In accordance with guidance, we’re lifting social distancing requirements and our reduced occupancy limits.

We look forward to seeing your faces in the space again – it’s been too long! Assuming conditions continue to improve, we’re planning to host an official reopening party in mid-late summer so we can all get together again.

]]>
New Planer and Dust Collection /2021/06/new-planer-and-dust-collection/ Mon, 07 Jun 2021 22:05:30 +0000 https://ui-eaa65dc01d5c552c450d90c9814b3c9c.sandstorm.hive76.org/?p=7179 Continue reading "New Planer and Dust Collection"

]]>

We have another pair of upgrades to our woodworking shop. We’re happy to add a brand new Dewalt 735x thickness planer. It does an impressive job of surfacing rough wood to a silky smooth finish. And to deal with all the wood-chips it generates, we’ve also installed brand new dedicated dust collection. We’ll eventually be setting up hookups from all our power tools to the new dust collector.

]]>
Restarting Open Houses /2021/05/restarting-open-houses/ Fri, 21 May 2021 11:29:41 +0000 https://ui-02276ec30d658164c4d91b37abdbe165.sandstorm.terracrypt.net/?p=6813 Continue reading "Restarting Open Houses"

]]>
During COVID, we’ve kept open-house restricted to members and those who pre-registered via email. As vaccinations become widely available, we’re beginning to ease back on those restrictions. Starting this week, non-members interesting in touring Hive no longer need to pre-register via email – you can just show up. Our COVID rules still remain in full effect, so you’ll need to wear a mask and we’ll still be enforcing a maximum occupancy at the space.

]]>
New Table Saw and Other Woodworking Improvements /2021/02/6808/ Tue, 09 Feb 2021 11:26:47 +0000 https://ui-02276ec30d658164c4d91b37abdbe165.sandstorm.terracrypt.net/?p=6808 We’ve made a number of improvements to our woodworking space. That includes a brand new table saw, as well as two new workbenches, a tabletop jointer, and a variety of hand-woodworking tools.

 

]]>
Updated COVID Rules /2020/09/updated-covid-rules/ Wed, 23 Sep 2020 16:42:20 +0000 https://www.hive76.org/?p=6475 Continue reading "Updated COVID Rules"

]]>
As the pandemic evolves, management has update our COVID-19 rules:

Mandatory Masks: masks should be worn all times within the space, even if you’re the only one there. You can take your mask off for eating/drinking.

10-person max occupancy: number of people in the space will be limited to 10 people, and members are encouraged to social distance as possible while in the space.

Wipe down touchpoints: cleaning spray and paper towels are provided through the space. Wipe down contact areas after use as part of cleanup.

Wash your hands: Hand-sanitizer is provided at both entrances in addition to the soap and sink in the bathroom. We recommend washing hands frequently, including when arriving and before leaving.

 

]]>
Upgraded Soldering Station /2020/09/new-soldering-station/ Wed, 23 Sep 2020 16:25:02 +0000 https://www.hive76.org/?p=6469 We’ve been busy upgrading the space. We recently shifted our soldering station to it’s new home near the classroom. With that comes new wire organization, improved task lighting, and less dust from the woodworking projects. It also frees up space in our front room for bigger projects.

]]>
Hive76 is Moving! /2018/03/hive76-is-moving/ Thu, 22 Mar 2018 03:55:37 +0000 https://www.hive76.org/?p=6383 Continue reading "Hive76 is Moving!"

]]>
After a good run at Bok, Hive76 is moving! Starting next month, we’ll be located at 1821 E Hagert St. In the meantime, open house will continue as usual – assuming no more freak snowstorms, that is.

This time around, we have the opportunity to build out the entire space ourselves, and we’re taking full advantage of it. More details to come very soon, but here’s a sneak peek at what we’re working on:

]]>
Intro to Electronics Workshop Oct 12th /2017/10/intro-to-electronics-workshop-oct-12th/ Thu, 05 Oct 2017 00:08:46 +0000 https://www.hive76.org/?p=6371 Continue reading "Intro to Electronics Workshop Oct 12th"

]]>
Thursday October 12th at 7:30 PM join us for an evening of learning and exploration! In this class students will be taken through the basic fundamentals of electricity all the way to creating circuits and experimenting. Every student will get a comprehensive kit of parts with designs for a variety of different circuits. The class is open to people of all skill levels with a suggested age of 16+. This is a ticketed event please see the ticketleap link below.

The format of the class will be a short lecture followed by a hands on workshop using the kit of parts. The kit of parts include a wide variety of resistors, LEDs, capacitors, integrated circuits, transistors, and diodes etc. Each of these components will be introduced in the lecture and have accompanying circuit designs showing how they work, please bring something to take notes.

For mobility accommodations please contact the organizers in advance of the event, thank you.

Attendees must purchase a ticket through our Ticketleap event page https://hive76.ticketleap.com/introelectronics/

Charles Affel has taught electronics workshops at Hive76 as part of DIY Music night.

]]>
Saturday Open House October 7th /2017/10/saturday-open-house-october-7th/ /2017/10/saturday-open-house-october-7th/#comments Mon, 02 Oct 2017 20:35:48 +0000 https://www.hive76.org/?p=6367 Continue reading "Saturday Open House October 7th"

]]>
Join us for our monthly Saturday Open House on October 7th. We are participating in POST, Philadelphia Open Studios, and we will be open starting at noon. Drop on by some of our members will be working on projects and some will be ready to show visitors around the space. See you there!

Also Intro Electronics class is October 12th 7:30 PM See here for tickets to that class https://hive76.ticketleap.com/introelectronics/

]]>
/2017/10/saturday-open-house-october-7th/feed/ 1
Learn CAD at Hive76; Fusion 360 class with Chris Thompson /2017/05/learn-cad-at-hive76-fusion-360-class-with-chris-thompson/ Thu, 04 May 2017 01:07:31 +0000 https://www.hive76.org/?p=6345 Continue reading "Learn CAD at Hive76; Fusion 360 class with Chris Thompson"

]]>
Make shape with tool

Computer Aided Design is the way we interact with the digital tools that make things. Do you want to try 3D printing or laser cutting? Ever want to CNC mill something from a chunk of aluminum? The first step is getting your idea into the computer.

Fusion 360 by Autodesk is a powerful parametric CAD tool that is free to use for makers, educators, and even most startups. It rivals SolidWorks in its functionality, but adds features found in many standalone tools. Your instructor Chris Thompson is a certified CAD professional with experience teaching digital making to beginners and professionals alike.

In this class you will learn the basics of most CAD systems and the intricacies of the Fusion 360 interface with hands-on demonstrations. The evening will begin with a general overview of CAD. There will be a structured walk-through of the program where every student creates the same model. This is followed by individual work where students explore the numerous different ways to make any one shape. Do you build up feature-by-feature, or would you rather carve away piece-by-piece? The class will reveal the hidden pitfalls of the program and any caveats. We will cover exporting your files for the next step in making. Any remaining time in the evening will be dedicated to answering any questions you have about CAD or making.

The class is Thursday, June 1 2017 from 7pm – 9pm at Hive76

Tickets are $50 and can be purchased from our ticketleap page. Members, don’t forget your discount!
Students must bring their own laptop with Fusion 360 installed and a 3 button mouse (left, right, scroll wheel button.) Please bring some paper for sketching and notes too.
Students will also need a free Autodesk account to save their work. Please follow these instructions to get set up with a free account.

]]>